 |
38T Thorn 130mm PCD deep section chainring for road TRIPLE chainsets - allows use of 24T 74mm PCD inner ring | |
| Fits to 130mm pcd triple chainsets and deep, overlapping ring section allows the use of smaller inner rings down to 24T. Price: £29.99 Bigger picture |
||
 |
38T Thorn 130mm PCD double to triple conversion chainring - use with 74mm PCD inner rings | |
| Any 74mm PCD chainring will fit to this adaptor ring, making 130mm PCD double chainsets into triple chainsets Price: £29.99 Bigger picture |
||
 |
39T Shimano SG 130mm PCD POLISHED Alloy chainring | |
Price: £14.99 Bigger picture |
||
 |
39T Shimano SG 130mm PCD SATIN alloy chainring ONE ONLY | |
Price: £14.99 |
||
 |
39T Shimano Ultegra 9spd 130mm PCD inner chainring 'B' type | |
Price: £24.99 Bigger picture |
||
 |
42T Shimano 130mm PCD silver Alloy chainring USED FOR 200 MILES | |
| Used for about 200 miles, still in good condition. Price: £9.99 Bigger picture |
||
 |
42T Shimano FC-6503 Ultegra 9spd 130mm PCD middle chainring (of triple) | |
| Sti compatible Price: £24.99 Bigger picture |
||
 |
50T Shimano 130mm PCD silver Alloy chainring LAST ONE (no longer available) | |
Price: £14.99 Bigger picture |
||
| 52T Shimano high quality Alloy 130mm PCD outer chainring | ||
Price: £25.00 |
||
 |
52T Shimano Ultegra 8spd 130mm PCD outer chainring 'A' type | |
Price: £29.99 Bigger picture |
||
 |
52T Sugino 130mm PCD Alloy chainring | |
Price: £12.99 Bigger picture |
||
 |
53T Shimano 1056 130mm PCD outer chainring B type | |
Price: £25.00 Bigger picture |
||
 |
53T Shimano 130mm PCD silver Alloy chainring | |
Price: £19.99 Bigger picture |
||
 |
53T Sugino 130mm PCD Alloy chainring | |
Price: £12.99 Bigger picture |
||
| 59T TA 130 PCD Alize 9/10 speed chainring | ||
Price: £47.99 Bigger picture |
||
 |
Egg 130mm PCD Chainring | |
| Very high quality chainrings in hard alloy, made in UK Price: £79.99 Bigger picture |
||
 |
TA 130mm PCD Alloy chainring | |
| Made from 7075 T6 heat treated aluminium sheet, cut in the traditional manner on a lathe which produces a much better and more accurate tooth form than the pressing method which is used by most other chainring manufacturers. The teeth are higher and the deeper groove eliminates chain suck. The ring thickness has been increased from 3.5 to 4.0mm. This strengthens the area which is ramped to best effect. Price: £22.99 Bigger picture |
||
 |
TA 130mm PCD Alloy chainring | |
| Made from 7075 T6 heat treated aluminium sheet, cut in the traditional manner on a lathe which produces a much better and more accurate tooth form than the pressing method which is used by most other chainring manufacturers. The teeth are higher and the deeper groove eliminates chain suck. The ring thickness has been increased from 3.5 to 4.0mm. This strengthens the area which is ramped to best effect. Price: £34.99 Bigger picture |
||
 |
TA 130mm PCD Alloy chainring | |
| Made from 7075 T6 heat treated aluminium sheet, cut in the traditional manner on a lathe which produces a much better and more accurate tooth form than the pressing method which is used by most other chainring manufacturers. The teeth are higher and the deeper groove eliminates chain suck. The ring thickness has been increased from 3.5 to 4.0mm. This strengthens the area which is ramped to best effect. Price: £37.99 Bigger picture |
||
Tel. 01278 441500
Fax. 01278 431107
Company no: 4121096, incorporated in England