Pendle / Thorn standard Tandem carrier TAN
	Mounts onto car roof ladder bars (you can buy these from your car dealer or high street autostore, we don't have them). Universal for virtually all tandems. Each wheel sits in a trough at either end of the rack, the bike is then held in an upright position with two adjustable supports which keep the frame in a vertical position. (highly recommended by SJSC). Straps included and are definitely to be used. Largest size ladderbars that will fit Clamping brackets are 25mm deep and 40mm wide. (depth can be increased by fitting longer bolts) Price:   £167.00
	Pendle 2 bike strap on wheel support rack SOWS
	This rack straps onto the back of the car with strong straps. Rubber pressure pads and plastic coated hooks safeguard the vehicles paintwork. Position adjustable to fit saloon, hatch estate and people carrier. Similar in design to the towbar mounted wheel support. This rack combines the rigidity and support of the towbar rack with the versatility of the strap on rack. Carries 2 bikes. Price:   £142.99              Bigger picture
	Pendle 2 bike tow ball wheel support rack WSBM2B Strap kit included.
	Made of stiff, high tensile steel tubing. The mounting block has a spherical inner section and bolts to European / swan neck style towballs. Each bike is held separately in its own wheel support trough, ensuring non-contact between your bikes whilst in transit. This is held in place by clips and can be removed when the rack is not in use, though the mounting block itself would need to be removed if you wanted to tow. Including lighting board. Straps are included. Weight 12.0kg Price:   £155.99              Bigger picture
	Pendle 2 bike tow bar wheel support rack WSTA2B Strap kit included.(2 boxes)
	Each bike is held separately, ensuring non-contact between your bikes. Mandatory for cars registered on or after the 1st August 1998. Approved to EC 94/20 safety standard. Suitable for pre Aug '98 vehicles Straps are included. Weight 12.0kg. Lighting board included. Single socket plate included. A double socket plate is available as a spare if there are 2 electrical appliances in the caravan. Price:   £167.99              Bigger picture
	Pendle 3 bike strap on rack SO
	This rack straps onto the back of the car with six strong straps. Rubber pressure pads and plastic coated hooks safeguard the vehicles paintwork. Position adjustable to fit saloon, hatch estate and people carrier. Straps included. Carries up to 3 bikes. Price:   £79.99              Bigger picture Pendle lighting board for hang on racks SOLU
	Pendle 3 bike tow ball hang on rack TBM3. Strap kit included.
	Made of stiff, high tensile steel tubing, with a durable powder coated finish to protect bicycle paint. The mounting block has a spherical inner section and bolts to European / swan neck style towballs. Bikes hang (side by side) from upright L shaped horizontal arms, which are held in place by clips. These can be removed when the rack is not in use, though the mounting block would also need removal if you wanted to tow. Straps are included, weight 6.0kg Price:   £89.99              Bigger picture Pendle lighting board for hang on racks SOLU
	Pendle 3 bike tow ball wheel support rack WSBM3B Strap kit included.
	Made of stiff, high tensile steel tubing. The mounting block has a spherical inner section and bolts to European / swan neck style towballs. Each bike is held separately in its own wheel support trough, ensuring non-contact between your bikes whilst in transit. This is held in place by clips and can be removed when the rack is not in use, though the mounting block itself would need to be removed if you wanted to tow. Including lighting board. Straps are included. Weight 16.0kg Price:   £189.99              Bigger picture
	Pendle 3 bike tow bar hang on rack TA3 Strap kit included.
	Mandatory for cars registered on or after the 1st August 1998 with type approved towbars fitted. Approved to EC 94/20 safety standard, but also suitable for pre August '98 vehicles. Straps are included. Weight 6.0kg Single socket plate included for electrics Price:   £95.99              Bigger picture Pendle lighting board for hang on racks SOLU
	Pendle 3 bike tow bar wheel support rack WSTA3B Strap kit included.
	Each bike is held separately, ensuring non-contact between your bikes. Mandatory for cars registered on or after the 1st August 1998 with type approved towbars fitted. Approved to EC 94/20 safety standard. Suitable for  pre Aug '98 vehicles. Weight 16.0kg. Lighting board included. Strap kit included. Single socket plate included. A double socket plate is available as a spare if there are 2 electrical appliances in the caravan. Price:   £202.99              Bigger picture
	Pendle 4 bike tow ball hang on rack TBM4 Strap kit included.
	Made of stiff, high tensile steel tubing, with a durable powder coated finish to protect bicycle paint. The mounting block has a spherical inner section and bolts to European / swan neck style towballs. Bikes hang (side by side) from upright L shaped horizontal arms, which are held in place by clips. These can be removed when the rack is not in use, though the mounting block would also need removal if you wanted to tow. Straps are included, weight 6.0kg Price:   £103.99              Bigger picture Pendle lighting board for hang on racks SOLU
	Pendle 4 bike tow ball wheel support rack WSBM4B Strap kit included.
	Made of stiff, high tensile steel tubing. The mounting block has a spherical inner section and bolts to European / swan neck style towballs. Each bike is held separately in its own wheel support trough, ensuring non-contact between your bikes whilst in transit. This is held in place by clips and can be removed when the rack is not in use, though the mounting block itself would need to be removed if you wanted to tow. Including lighting board. Straps are included. Weight 19.5kg Price:   £219.99              Bigger picture
	Pendle 4 bike tow bar hang on rack TA4 Strap kit included.
	Mandatory for cars registered on or after the 1st August 1998 with type approved towbars fitted. Approved to EC 94/20 safety standard, but also suitable for pre August '98 vehicles. Straps are included. Weight 8.0kg Single socket plate included for electrics Price:   £109.99              Bigger picture
	Pendle 4 bike tow bar wheel support rack WSTA4B Strap kit included.
	Each bike is held separately, ensuring non-contact between your bikes. Mandatory for cars registered on or after the 1st August 1998 with type approved towbars fitted. Approved to EC 94/20 safety  standard. Suitable for pre Aug '98 vehicles. Weight 19.5kg. Lighting board included. Strap kit included. Single socket plate included for electrics Price:   £234.99              Bigger picture
	Pendle spare wheel rack WR	Honda CRV (1997-02) & Freelander Landrover Defender Standard - most models HONDA CR-V 2002-PRESENT  Type
	Slots through the spare wheel, bolting securely to the wheel fixture on the rear door, allowing rear door access. Available In three different models depending on the model of your car. Straps not inc. kits are sold separately. Price:   £152.99              Bigger picture
	Pendle T-bar tandem rack TBAR
	Carries the bike in the same way as the standard tandem rack but one wheel is removed to allow for a kiddie crank. A single vertical upright supports the frame, front wheel is removed and attached to the t-bar. Straps included. Please note that the tandem bike racks must be fitted onto a roof rack. The roof racks are not supplied with the tandem racks. Price:   £167.00              Bigger picture
	Pendle tow ball Discovery 4 bike hang on rack TBMD Strap kit included.
	Made of stiff, high tensile steel tubing, with a durable powder coated finish to protect bicycle paint. The mounting block has a spherical inner section and bolts to European / swan neck style towballs. Bikes hang (side by side) from upright L shaped horizontal arms, which are held in place by clips. These can be removed when the rack is not in use, though the mounting block would also need removal if you wanted to tow. This rack allows up to 6" offset from the mounting block to give enough clearance around the spare tyre on the smaller 4 x 4s like the Discovery. Straps are included, weight 8.5kg. Price:   £112.99              Bigger picture
	Pendle tow ball Landrover 4 bike hang on rack TBML Strap kit included.
	Made of stiff, high tensile steel tubing, with a durable powder coated finish to protect bicycle paint. The mounting block has a spherical inner section and bolts to European / swan neck style towballs. Bikes hang (side by side) from upright L shaped horizontal arms, which are held in place by clips. These can be removed when the rack is not in use, though the mounting block would also need removal if you wanted to tow. The Landrover rack allows up to 10" offset for larger 4 x 4 vehicles with wider tyres. Straps are included. Weight 9.0kg. Price:   £123.99              Bigger picture
	Pendle tow bar Discovery rack TAD Strap kit included.
	This rack allows up to 6" offset from the mounting block to give clearance for the spare tyre on 4 x 4s like the Discovery. Mandatory for cars registered on or after the 1st August 1998. But also suitable for pre Aug '98. Straps are included. Weight 8.5kg. Single socket plate included for electrics Price:   £122.99              Bigger picture
	Pendle tow bar Landrover rack TAL Strap kit included.
	The Landrover rack allows up to 10" offset for larger 4 x 4 vehicles with wider tyres. Mandatory for cars registered on or after the 1st August 1998, but also suitable for pre '98. Approved to EC 94/20 safety standard. Straps are included. Weight 9.0kg Single socket plate included for electrics Price:   £135.99              Bigger picture
	Pendle tow bar Landrover hang on rack TBL Strap kit included.
	Made of stiff, high tensile steel tubing, with a durable powder coated finish to protect bicycle paint. The mounting block attaches behind the tow ball with bolts. Bikes hang (side by side) from upright L shaped horizontal arms, which are held in place by clips. These can be removed when the rack is not in use, and as the mounting block is behind the tow ball, it does NOT need removal if you want to tow. The Landrover rack allows up to 10" offset for larger 4 x 4 vehicles with wider tyres. Strraps are included Weight 9.0kg Price:   £100.00              Bigger picture
	SJSC conversion kit for Triplets to fit on a Pendle tandem carrier
	Consists of bar, and all fittings to attach it to an existing Pendle standard tandem carrier (sold separately), to allow you to transport your Triplet safely and securely. Suitable for child and adult triplets, and child quads. Price:   £29.99              Bigger picture
	Pendle strap on tyre rack SOTR
	This rack is very similar to the spare wheel rack except that being a strap on rack, it is more verssatile and easier and quicker to dismantle. It is a less permanent option and is viewed as the budget version of the spare wheel rack. The tyre cover must be removed for fitting. Fully adjustable to cope with an offset or centre mounted spare wheel. Carries 2 bikes. Price:   £94.99              Bigger picture Pendle lighting board for hang on racks SOLU